![Water Dispenser Water Purifier Water Treatment Equipment Chemical Water Filter Consumer Electronics Vending Machine](//www.micstatic.com/athena/img/transparent.png)
![Water Dispenser Water Purifier Water Treatment Equipment Chemical Water Filter Consumer Electronics Vending Machine](//www.micstatic.com/athena/img/transparent.png)
![Water Dispenser Water Purifier Water Treatment Equipment Chemical Water Filter Consumer Electronics Vending Machine](//www.micstatic.com/athena/img/transparent.png)
DESCRIPTION |
SPECIFICATION |
PACKING INFO |
1.) hot,normal and cold water.
2.)Good quality compressor,R134a cooling gas,green and pollution-free.
3.) Stainless steel water tank .
4.) New ABS plastic material
5.)three water taps
6.)with E.U 2pin(VDE) plug. |
Rated voltage 220-240V~
Rated frequency 50Hz/60Hz
Heating power 550W
cooling power 85W
Hot water temperature ≥90ºC, 5.0L/h
Cold water temperature ≤10ºC, 1.5L/h
Volume of hot tank 1.0L
Volume of water cold tank 2.5L~3.0L
Type of electricity-shock-proof :I |
Packing Size:
325x340x530mm
1190pcs/ctns/40HQ |
Q1: Does the water dispenser need to be cleaned regularly?
Yes, in order to ensure the hygiene and performance of the water dispenser, it is recommended to clean it at least once a month.
Q2: How to clean the water dispenser?
When cleaning the water dispenser, follow the following steps: Disconnect the power supply and drain the water from the water tank.
Wipe the outside of the water dispenser with a gentle cleaner and a soft cloth.
For the tank, it can be cleaned with food grade disinfectant and then thoroughly washed with water.
Q3: Is it normal for the water dispenser to heat the water?
Minor noise is normal during heating because the heating element is working.
But if the noise is too high or continuous, it is recommended to contact the after-sales service for inspection.
Q4: How is the hot water temperature of the water dispenser is not hot enough?
If the hot water temperature is not hot enough, it may be due to the following reasons: the power supply voltage is unstable.
Failure of the heating element.
Water quality problems affect the heating efficiency.
Set the temperature is too low.
Please check these factors, and if the problem persists, please contact the customer service.
Q5: What if the cold water function of the water dispenser does not work?
The cold water function may not work due to the power is not connected or unstable.
The refrigeration system fails.
Cold water function was not activated.
Please check the power supply and setting, if the problem remains, please consult the after-sales service.
Q6: What is the smell when the water dispenser is used?
Early in use, the water dispenser may have some plastic or a new machine smell.
This usually disappears after a few uses.
If the odor persists, it may be a water quality problem.
Q7: How to judge whether the water dispenser needs to be repaired?
The water cooler may be repaired if the following conditions occur:Keep making abnormal noise.
The heating or cooling function fails.
Continuous water leakage or water overflow.